was successfully added to your cart.

Bristol Finish Exterior Marine Coatings Technical Data

By January 18, 2016 Boat Varnishing Tips
Colour & Finish :
Amber Clear / High Gloss
Range of gloss levels available
Package :
1 litre kit  1.07L approx
4 litre kit  4.28L approx
Mixing Ratio By Volume : 8 Part A  :  1 Part B Pot Life :
At 29 degrees celcius, 2 hours
At 21 degrees celcius, 4 hours
Mixed Solids Per Litre : 56% by volume Flash Point : 39 degrees celcius
Recommended Use :
Provides excellent adhesion to & filing
of woods with interior or exterior exposure.
Suitable for building & / or finishing coats
Method of Application : Brush / conventional air spray
Recommended Application : Brush Required Thinners :
Bristol Finish Tropical Reducer
(for brush or spray application)
Acetone / MEK for initial
build-up coats ONLY
 Thinning Ratio – Brushed :
NEW TIMBER : First coat 50%, second coat 40%
third coat 30%, fourth coat 20%, fifth coat 10%.
Additional coats thin if required up to 10%
EXISTING FINISH : Additional coats thin if required
up to 10%
Clean Up :
Acetone / Bristol Finish Tropical
Reducer
Theoretical Coverage : 22m square per litre kit, per coat Tape Removal : At 21 degrees celcius , 24 hours
Application Temperature :
Between 0 degrees celcius & 49 degrees celcius
during application. For cold & humid conditions, the
use of Bristol Finish Accelerator is advised.
Tack Free : At 29 degrees celcius, 1 hour