TECHNICAL DATA
Spray, seal & store.
Oxygen & moisture can thicken or skin over leftover finishes. BLOXYGEN’s powerful, heavy inert gas protects your leftovers from damage.
BENEFITS
Use all of your finish, not just the first half
Eliminate spray gun clogs or jams
Reduce hazardous waste
Leftovers remain safe, in their original, labelled containers
ENVIRONMENTALLY FRIENDLY, NATURAL GASES
Small container high pressure – Net Contents 0.41 OZ / 12 g
NOTE: Full can feels empty
EASY TO USE :
Always wear safety glasses
Twist extension tube into spray tip
Avoid splash — spray toward side of container
Hold the lid closely above the container & capture the heavy gases as the oxygen is forced out
Spray enough BLOXYGEN to fill the container void twice
THIS AVERAGES : 2 full seconds for 1 litre cans / 4 full seconds for 4 litre cans
BUT … depends on the empty volume of your container
Close the lid immediately & seal in the protective gases. The heavy gases will settle & protect finish until the container is opened again
PROVIDES APPROXIMATELY 75 USES IN LITRE CANS
CAUTION: Contents under pressure. Do not incinerate
Do not expose to heat or temperatures above 120 farenheight / 50 celcius
Misuse by deliberately concentrating & inhaling contents may be harmful or
cause fatal asphyxiation
Keep out of reach of children
CONTAINS : Argon. Non-flammable, inert, and non-hazardous
BLOXYGEN is proudly made in the USA. US Patent # 6629402
NOTE : Full can feels empty