was successfully added to your cart.

Bristol Finish Water Based Interior Marine Coatings – Technical Data

By January 18, 2016 Boat Varnishing Tips

Bristol Finish Classic Clear Water Based Interior High Gloss Urethane is a versatile, single-component, clear wood coating suitable for all timbers. It has very high abrasion resistance & suitable for interior use only. As a water-based coating, it provides a safe, non-toxic, low fume/odour alternative to conventional wood coatings. Water wash-up characteristics ensure further ease of use. With no sanding required between coats, & a 1 hour minimum recoat time, it builds quickly, meaning less time, labour & product is required. It must be applied over existing single & two-component coatings as either a build-up & / or finish coating.


Colour & Finish : Clear / High Gloss Package : 1 litre 946ml approximately
Mixed Solids Per Litre : 26 by volume Flash Point : Nil
Recommended use :
For interior use only. Suitable for
building & / or finishing coats
Methods of Application : Brush / conventional airless spray
Recommended Application : Brush Recommended Thinners : Clean, fresh water
Thinning Ratio : thin if required up to 5% Clean Up : Clean, fresh water
Theoretical Coverage : 18 square meters per litre kit, per coat Application Temperature :
Between 4 degrees celcius & 49 degrees
celcius during application
Tape Removal : At 21 degrees celcius, 4 hours Tack Free : At 29 degrees celcius, 1 hour